專業封口 |
2018 MARCH 30TH CASTING IMPREGNATION MATERIAL

Three Characteristics of Impregnation Treatment

Internal Penetration Hardening Multifunctional Materials

  1. For all the surface treatments of hole materials, mutli-holes materials, and fiber materials, some methods in the past tend to have adverse impacts. For example, under wet processing, if there is micro hole existing, chemical treatment leaks through the micro hole to penetrate into objects and after external treatment, it leaks out again. That brings all kinds of adverse effects internally and externally. If you pre-select the appropriate liquid materials, through vacuum methods, the liquid fills the internal micro hole and make it harden. It means dealing with the impregnation is to fill the internal micro hole, and then apply wet surface treatment. The mentioned problem can be resolved.
     2.For the general organic materials, through impregnation, multifunctional materials can be achieved.

     3.For the non-micro hole materials, after the treatments of dissolution shoot film, electrolytic oxidation film,chemical film, and surface coating to form the mutli-hole materials, through impregnation, enhancements of multi-functional materials can be achieved